Mercury Sable Catalytic Converters Scrap Prices | USA (2 results)

F7DC HD DOG
Ref:
F7DC HD DOG
Ref2:
5F 250 / M8 299
Car brands:
Car models:
Car description:
Mercury Sable
Components:
Max price for 6 months: 97 USD
F20C
Ref:
F20C
Car brands:
Car models:
Car description:
Mercury Sable / Ford Taurus
Components:

USA - Catalyst buyer's companies AutoCatalyst Market

Mercury catalytic converter scrap price

Mercury catalytic converter is an obligatory part of the vehicles of the American automobile group. Mercury catalytic converter has been used in automobiles since its first release. Mercury catalytic converter is designed to reduce the toxicity of engine exhaust, it has many positive properties, but when a part fails, car owners start having problems, the need to Mercury catalytic converter prices be considered.

Mercury catalytic converters

The presence of a Mercury catalytic converter is required in connection with the introduction of new environmental standards. The requirements for the purity of exhaust gases from automobile engines have become more stringent. Recently, they have been incorporated into all modern automobiles. As a rule, the catalytic converter is located immediately after the exhaust pipe of the silencer, but this is in the standard version, in many expensive foreign cars there can be not one, but two or more Mercury catalytic converters. Precious metals (gold, platinum, palladium, etc.) are used to remove harmful impurities from the exhaust gases, which is why the cat Mercury scrap price is high enough. Mercury catalytic converters drive an average of between 60 and 150 thousand km.

It is a metal can like a silencer, in which there are ceramic honeycombs on which a thin layer of precious metal is applied. The toxic exhaust gases flowing through the ceramic are oxidized, generating heat and the reaction thereby reduces the toxicity of CH and CO.

Mercury catalytic converters replacement

A Mercury catalytic converter fails for several reasons:

  • The ceramic part is destroyed by impact;

  • Due to the poor quality of the fuel, the temperature in the exhaust system rises, the ceramic honeycomb has melted;

  • The ceramic element is clogged with soot.

If the Mercury catalytic converter is slightly contaminated, you can try to flush it, but to do this it is necessary to remove the element of the exhaust system. A defective catalytic converter has a negative effect on the operation of the engine: the power of the combustion engine is lost; fuel consumption increases; Motor runs intermittently. Complexity of work on replacing the Mercury catalytic converter depends on a specific make of the vehicle and the type of engine installed. In general, changing the Mercury catalytic converter on any model is not too difficult, and if desired, any driver can do a similar operation with their own hands. But the problems here lie elsewhere: in the course of time, screws and nuts stick together, they are difficult to loosen or they do not turn at all. The joints of the exact pipes boil too, and in order to separate the elements of the exact system from each other it is necessary either to keep the joint strong or to cut the pipes with a veil. If the old element is no longer needed and it has worked, it will have to be replaced, but it should be noted that on many vehicles the Mercury catalytic converter has a single design with an exhaust manifold, such an element of the exhaust system is very expensive. Consider cutting repair costs, check the Mercury catalytic converter scrap price list when the old item is sold.

Show more
This website uses cookies to ensure you get the best experience on our website.
Learn more