What does catalytic converter do? Platinum, rhodium, palladium and even gold can act as a perfect catalysts in the catalytic converter. Without them, the process would have been impossible. The entire filling of the catalytic converter looks like a layer of precious metals deposited on a ceramic honeycomb. And the catalytic converter is not only a unit, but also housing, and lambda sensors, and a heat insulator casing. It is the ceramic block that is the catalytic converter of the reaction, and not the entire item assembly that is "dusting" into the cylinders, so they usually talk about removing the catalytic converter, sometimes replacing it with other parts. The first catalytic converter was installed back in 1975. But there were no big problems from them then, and until recently no one could have thought that the catalytic converter could cause scuffing and oil scrapes. The catalytic converter was located far from the cylinder block, in the exhaust system somewhere under the bottom
We’ve been collecting data for many years and now we want to share it with you
The world's biggest catalytic converter base
All prices are based on the exact composition of precious metals in the catalysts
We have collected the most complete characteristics of the catalysts
Popular catalytic converters AutoCatalyst Market
New catalytic converters AutoCatalyst Market
Modern motorists have an excellent opportunity to get rid of a faulty catalytic converter when and where they want to do it. Usually, there are plenty of car service stations that are ready to give some information on purchasing old catalysts. Specialized companies always buy used catalytic converters in any quantity and offer good deals, both to individuals and large suppliers. Now you can sell catalytic converters, the price for the device will be high, and the operating conditions are usually transparent. The purchase of catalytic converters is equal for both foreign and domestic manufacturers in any condition. You can calculate the cost of a scrap catalytic converter using a special calculator or simply by calling consultants. It is not only a profitable but also a satisfying process, due to your will to recycle the old item. In which cases should the catalytic converter be sold Is it really necessary to consider mileage and driving conditions? Should everyone follow a p
The skyrocketing price of palladium, fueled by increased market demand for this precious metal, has turned into a wave of thefts of a car catalytic converter. According to the latest statistics, over the past six months, palladium prices have increased by more than 50%. As a result, this metal, which is actively used by automakers in a catalytic converter, designed to reduce harmful engine emissions, for the first time since 2002 has become more expensive than gold. This fact provoked the theft of catalysts. Removing a catalytic converter from the car is not too difficult. It takes several minutes, and video instructions can be found on the Internet.Thieves operate in groups: at night they drive up to the chosen vehicle, saw off the catalytic converter with a piston saw, and then drive on. It is difficult to find robbers, as they hand over the stolen catalysts for scrap at pick-up points that do not require identification. Experts attribute the growth in demand for palladium to new
A catalytic converter is one of the main elements of the exhaust system, performing the function of reducing the emission of harmful substances and exhaust gases into the atmosphere. It is usually installed on both gasoline and diesel power plants in close proximity to the exhaust manifold or muffler. The catalyst is subject to mandatory disposal, which is a complicated process that requires special equipment. The purchase of a catalytic converter has been carried out almost everywhere. The cost of every used car catalytic converter depends on: Type of device (metal or ceramic); Countries of origin (Germany, France, USA, Japan or China, RF); Car model, engine size, year of manufacture, country of assembly or where it was exported; From size: cut from the body, whole or broken, shredded; On the purity, degree of contamination of the delivered mass: with asbestos, cotton wool or without; From exchange quotations of prices for metals Pt, Pd, Rh and from
Scrap catalytic converter catalog
Market of recyclable materials has a great demand for car catalysts. There is a huge number of people who want to buy a used device. The main task of such individuals is the purchase of converters at a low price, for subsequent resale in large organizations involved in processing of products on a professional basis.
Car catalyst is an additional device that is introduced into the engine to reduce toxicity. Its primary purpose is to oxidize toxic compounds contained in exhaust gases. Catalytic converter is an integral part of the exhaust system of a vehicle. It is a rather valuable and important detail.
Its general construction is simple and contain following elements:
A catalyst substrate, which is usually a ceramic part of a honeycomb structure.
A washout, which is used to disperse exhausted materials.
Cerium, applied in catalysis.
Mix of palladium and rhodium metals to realize the reaction.
Classification of a car catalytic converter includes: catalytic converter prices
location of the part;
materials used for manufacture;
mechanism of interaction with fuel;
cost and efficiency.
Various catalyst types with corresponding cost
Converters differ by catalytic layer which is actually applied. It can be of two common types:
ceramic block made in the form of honeycombs,
block of metal tape.
Ceramic type is more common than metal, and at the same time is characterized by its lower cost. A great disadvantage of ceramic catalysts is instability. It is quite small and weak facing the impact during the ride. Among the most common causes for destruction of ceramic catalysts is ignition system. When attempting to start the engine and fuel does not reach it immediately, the unburned quantity gets accumulated in the exhaust path destroying honeycombs.
Used catalytic converters are valued as raw materials for processing, because they contain a large amount of precious metals like platinum, rhodium or palladium. Due to the presence of heavy and radioactive metals, there are special requirements for disposal of catalytic converters. The problem of processing old catalysts is especially relevant all over the world. Buying up old or broken catalytic converters, we conclude a mutually beneficial deal for everyone, including nature.
Catalytic converter price and professional approach
Although its design is simple, the content of palladium, platinum and rhodium salts significantly affects the catalytic converter price.
Factors affecting the cost of a catalytic converter when buying:
Type of a catalyst. Usually there are three types of catalysts (ceramic, metal and universal), a ceramic product that works with a gasoline engine is in great demand.
Car mileage, which affects the content of precious metals.
Composition and quantity of precious metals.
Vehicle operating conditions.
Country of manufacture. Various countries of origin have different catalyst price, because it is about valuable components that are the object of isolation during processing.
Year of production and intensity of operation. Catalytic converter will cost more, if it is older. New products have many structural and qualitative changes that have reduced the volume of valuable metals inside. Consider this factor, that can affect the catalytic converter cost. But it has to be presented in an inappropriate condition, without mechanical damage and significant contamination.
Catalytic converter: price scrap
Catalysts have to be removed because of its loss of efficiency. Engine can not get enough power, or even does not start. Normal device life of the vast majority of passenger cars is 150-250 thousand km.
The procedure of purchase itself consists of several stages, which are presented below:
Initial inspection of catalytic converter to determine serial number and verify its compliance with established standards.
Preliminary weighing of the item.
Opening the metal housing to remove catalytic layer.
Product processing with a help of a special mechanism.
Weighing obtained powder and analysis to identify the percentage of valuable metal salts.
Searching where to hand over catalytic converters our customers receive:
• Professional individual approach.
• Worthy reward.
• Accurate determination of the number of precious metals.
• Fair price guarantee